Registering A Scan/Fax Program; Registering Programs - Oce VarioLink 4522c User Manual

9
9.2.13

Registering a scan/fax program

You can register destinations to which faxes are frequently sent as programs together with Scan, Original,
and Communication Settings. If these are registered as programs, you can call a registered set of the
destination and its Scan, Original, and Communication Setting by simply pressing the [Mode Memory] key.
Reference
- Up to 400 normal programs and up to 10 "temporary programs" can be registered as programs.
- If 410 programs have been already registered, delete unnecessary programs before registering new
ones.

Registering programs

1
Press the [Fax/Scan] key on the control panel and then configure Scan Settings, Original Settings and
Communication Settings for which you want to register them as a program.
2
Press the [Mode Memory] key.
3
Select an unregistered program button, and then press [Register Program].
The Register Scan/Fax Program screen appears.
Item
Name
Address
URL Notif. Destination
9-22
Description
Use the touch panel to enter the program name using up to 24 characters.
Allows you to select one destination. Select a destination from Address Book
or enter it directly.
• If "Confirm Address (Register)" is ON, a screen for entering a fax number
again appears after you specify a fax destination in the [Direct Input] tab
and press [OK]. Enter the fax number and then press [OK].
• For details on the Confirm Address function, refer to page 10-23.
Allows you to specify the destination to be notified by E-mail when a User
Box in the main unit, FTP, SMB or WebDAV job has finished. Select a desti-
nation from Address Book or enter it directly.
One-Touch/User Box Registration
VL6522c/VL5522c/VL4522c
9.2