Tsi User Box Setting - Oce VarioLink 4522c User Manual

10

TSI User Box Setting

Specify whether to use the TSI User Box function. To use the function, configure the following items.
If two units of the fax kit FK-502 are installed, and [Individual Receiving Line Setup] is set to [ON] in
Administrator Settings, you can select either [Fax Line 1] or [Fax Line 2] to configure settings for each line.
For details on [Individual Receiving Line Setup], refer to page 10-37.
d
Reference
For details on the TSI User Box function, refer to page 7-4.
Item
Action when TSI User Box is not set.
Print
TSI User Box Registration
Reference
- You can also specify the registered group as the destination.
10-28
Description
Configure how the machine should react when a specified
User Box is not found.
[Automatically Print]: Prints received documents.
[Memory RX User Box]: Saves received documents in a Mem-
ory RX User Box.
Specify whether to print a received document after receiving.
Register destinations to which to distribute RX documents.
Up to 128 destinations can be registered. Select a desired
number, and then press [Edit].
TSI User Box Set- Allows you to distribute received faxes to other fax machines
ting or User Boxes in this machine. Specify a sender's fax number
in [Sender (TSI)].
Specify a forwarding destination in [Forwarding Destination].
To distribute received faxes to other fax machines, specify
destinations with [Select from Address Book]. To distribute
them to User Boxes in the machine, specify destinations with
[Search by User Box Number].
• A User Box for which confidential reception is enabled, and
a Relay User Box cannot be used for a forwarding destina-
tion.
Administrator Settings (G3)
VL6522c/VL5522c/VL4522c
10.4