Fax Settings - Header Information - Oce VarioLink 4522c User Manual

10
10.4.6

Fax Settings - Header Information

Register sender information and fax ID that are included in TX documents that is to be printed on documents
received by the recipient.
Item
Sender
Sender Fax No.
10-16
Description
Allows you to register more than one sender name that is to be printed on
documents received by the recipient as sender information. Enter a text us-
ing up to 30 characters.
• To register a new sender, press [New].
• Possible to specify up to 20 types of views for senders.
• To change the settings for a registered sender, select the sender and then
press [Edit]. In the Edit screen, registered numbers cannot be changed.
• To delete a registered sender, select the sender to be deleted and then
press [Delete].
• To specify a sender as the default, select the sender and then press [Set
as Default].
If two units of the fax kit FK-502 are installed, and [Individual Receiving Line
Setup] is set to [ON] in Administrator Settings, default value can be specified
for each line. Select the sender to specify as the default, and then press either
[Set as Default for Line 1] or [Set as Default for Line 2]. For details on [Individ-
ual Sender Line Setup], refer to page 10-20.
The registered fax number is printed as the sender's information on the doc-
ument received by the recipient. Enter a sender fax number using 0-9, *, #,
[+], and space (up to 20 characters).
• If two fax kit FK-502 are installed, register the sender fax number for each
of the two lines. To specify the fax ID of an extension line, refer to page
page 10-34.
Administrator Settings (G3)
VL6522c/VL5522c/VL4522c
10.4