A
11.3.2
Display the Event Log Configuration
Enter the
settings as shown in the following example:
SANbox #> show log settings
Current settings for log
------------------------
Started
FilterComponent
FilterLevel
DisplayLevel
FilterPort
11.3.3
Restore the Event Log Configuration
Enter the
factory default as shown in the following example:
SANbox (admin) #> set log restore
11.4
Clearing the Event Log
Enter the
the following example:
SANbox (admin) #> set log clear
59183-01 A
Show Log
Settings command to display all event log configuration
True
NameServer MgmtServer Zoning Switch Blade Port Eport Snmp CLI
Info
Critical
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Set Log
Restore command to return the event log configuration to the
Set Log
Clear command to delete all entries in the event log as shown in
11 – Event Log Configuration
Clearing the Event Log
11-5