Qlogic SANbox 5000 Series Interface Manual page 249

A
Information Type
Temp
Voltage
Tx Bias
Tx Power
Rx Power
Value
Status
HighAlarm
HighWarning
LowWarning
LowAlarm
59183-01 A
Table 13-25. Transceiver Information (Continued)
Temperature in degrees Celsius.
Supply voltage in Volts. The range is 0–6.55.
Transmitter laster bias current in milliamps. The range is
0–655.
Transmitter coupled output power in milliWatts. The range is
0–6.55.
Received optical power in milliWatts. The range is 0–6.55.
Measured value.
State associated with the measured value:
Normal: Value is in the normal operating range.
HighAlarm: Value exceeds the high alarm threshold.
HighWarning: Value exceeds the high warning threshold.
LowWarning: Value is less than the low warning threshold.
LowAlarm: Value is less than the low alarm threshold.
Vendor specified threshold above which an alarm is issued.
Vendor specified threshold above which a warning is issued.
Vendor specified threshold below which a warning is issued.
Vendor specified threshold below which an alarm is issued.
13 – Command Reference
Description
Show Media
13-119