9 – Device Security Configuration
Managing Security Sets
9.5
Managing Security Sets
Managing Security Sets consists of the following tasks:
Create a Security Set
Delete a Security Set
Rename a Security Set
Copy a Security Set
Add Groups to a Security Set
Remove Groups from a Security Set
Activate a Security Set
Deactivate a Security Set
All of these tasks except
require a Security Edit session.
9.5.1
Create a Security Set
Enter the
the following example:
SANbox (admin-security) #> securityset create securityset_1
9.5.2
Delete a Security Set
Enter the
following example:
SANbox (admin-security) #> securityset delete securityset_1
9.5.3
Rename a Security Set
Enter the
following example:
SANbox (admin-security) #> securityset rename securityset_old securityset_new
9.5.4
Copy a Security Set
Enter the
new security set as shown in the following example:
SANbox (admin-security) #> securityset copy securityset_1 securityset_2
9-10
Activate a Security Set
Securityset
Create command to create a new security set as shown in
Securityset
Delete command to delete a security set as shown in the
Securityset
Rename command to rename a security set as shown in the
Securityset
Copy command to copy a security set and its contents to a
and
Deactivate a Security Set
S
59183-01 A