Displaying Ssl And Ssh Services; Creating An Ssl Security Certificate - Qlogic SANbox 5000 Series Interface Manual

A
8.2

Displaying SSL and SSH Services

Enter the
SSL services as shown in the following example:
SANbox #> show setup services
System Services
-----------------------------
TelnetEnabled
SSHEnabled
GUIMgmtEnabled
SSLEnabled
EmbeddedGUIEnabled
SNMPEnabled
NTPEnabled
CIMEnabled
FTPEnabled
MgmtServerEnabled
8.3

Creating an SSL Security Certificate

Enabling SSL automatically creates a security certificate on the switch. The
security certificate is required to establish an SSL connection with a management
application such as Enterprise Fabric Suite 2007. The certificate is valid 24 hours
before the certificate creation date and expires 365 days after the creation date.
Should the original certificate become invalid, enter the
command to create a new one as shown in the following example:
SANbox (admin) #> create certificate
The current date and time is day mon date hh:mm:ss UTC yyyy.
This is the time used to stamp onto the certificate.
Is the date and time correct? (y/n): [n] y
Certificate generation successful.
To ensure the creation of a valid certificate, be sure that the switch and the
workstation time and date are the same. Refer to
page 5-17.
59183-01 A
Show Setup Services
True
False
True
False
True
True
True
True
True
True
8 – Connection Security Configuration
Displaying SSL and SSH Services
command to display the status of the SSH and
"Setting the Date and Time" on
Create Certificate
8-3