Qlogic SANbox 5000 Series Interface Manual page 34

4 – Network and Fabric Configuration
Verifying and Tracing Fibre Channel Connections
Enter the
two devices as shown in the following example. The devices can be defined as
Fibre Channel addresses or WWNs.
SANbox#> fctrace 970400 970e00 hops 5
36 bytes from 0x970400 to 0x970e00, 5 hops max
Domain
------
97
97
4-6
Fctrace command to display Fibre Channel routing information between
Ingress Port WWN
----------------
20:04:00:c0:dd:02:cc:2e
20:0e:00:c0:dd:02:cc:2e
Port Egress Port WWN
---- ---------------
4 20:0e:00:c0:dd:02:cc:2e
14 20:04:00:c0:dd:02:cc:2e
S
Port
----
14
4
59183-01 A