Securityset - Qlogic SANbox 5000 Series Interface Manual

13 – Command Reference

Securityset

Securityset
NOTE:
Manages security sets in the security database.
Authority
Admin session and a Security Edit session. Refer to the
page 13-52
Groups, and List keywords are available without an Admin session. You must
close the Security Edit session before using the Activate and Deactivate
keywords.
Syntax
securityset
activate [security_set]
active
add [security_set] [group_list]
copy [security_set_source] [security_set_destination]
create [security_set]
deactivate
delete [security_set]
groups [security_set]
list
remove [security_set] [group]
rename [security_set_old] [security_set_new]
Keywords
activate [security_set]
Activates the security set given by [security_set]. This keyword deactivates the
active security set. Close the Security Edit session using the
Security Cancel command before using this keyword.
active
Displays the name of the active security set. This keyword is available to without
an Admin session.
add [security_set] [group_list]
Adds one or more groups given by [group_list] to the security set given by
[security_set]. Use a <space> to delimit multiple group names in [group_list]. A
security set can have a maximum of three groups with no more than one group of
each group type.
13-56
This command requires the Fabric Security license key. To purchase a
license key, contact your authorized maintenance provider or
authorized reseller. Use the
for information about starting a Security Edit session. The Active,
Feature command to install a license key.
"Security" command on
S
Security Save or
59183-01 A