Rename A Zone; Copy A Zone; Add Members To A Zone; Remove Members From A Zone - Qlogic SANbox 5000 Series Interface Manual

7 – Zoning Configuration
Managing Zones
7.7.3

Rename a Zone

Enter the
following example:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #> zone rename zone_1 zone_a
SANbox (admin-zoning) #> zoning save
7.7.4

Copy a Zone

Enter the
to a new zone (zone_2) as shown in the following example:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #> zone copy zone_1 zone_2
SANbox (admin-zoning) #> zoning save
7.7.5

Add Members to a Zone

Enter the
following example:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #> zone add zone_1 alias_1 1,4 1,5
SANbox (admin-zoning) #> zoning save
7.7.6

Remove Members from a Zone

Enter the
shown in the following example:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #> zone remove zone_1 alias_1 1,4 1,5
SANbox (admin-zoning) #> zoning save
7-16
Zone Rename command to rename zone_1 to zone_a as shown in the
Zone Copy command to copy the contents of an existing zone (zone_1)
Zone Add command to add ports/devices to zone_1 as shown in the
Zone Remove command to remove ports/devices from zone_1 as
S
59183-01 A