Section 5 Setting Up - Netware - Axis 5400 User Manual

Section 5: Setting Up - NetWare
58
Print Queues
The AXIS 5400+ uses the print server name followed by the printer
port as the default Print Queue name and print server port name. If
you want to change the default printer queue names, just type the new
names in the available text fields.
The final user prompt in the Installation Wizard allows you to print a
Test Page
test page through NetWare. The test page displays the name of all the
NetWare servers the AXIS 5400+ is connected to and shows the status
of each connection.
Unless you want to connect or create additional printing queues, the
installation for the NetWare environment is now completed.
Notes:
The parameters entered during installation are not permanent; they can be
altered at any time according to your network printing requirements.
No serious or permanent damage will be caused if you make a mistake during
installation. If you find, at any time, that printing is not satisfactory, the parameters
can easily be changed to tune the system to your requirements.
For information on advanced functions, please refer to the AXIS Network Print
Server Technical Reference. You can download this or other technical
information over the Internet by accessing the Axis web: http://www.axis.com/
or the AXIS Product CD.
Environment Default Names
NetWare
Windows & OS/2
AppleTalk
Default Print Queue Names and Print Server Port Names
for each operating environment.
AXIS 5400+ User's Manual
AXIS1A0003_LPT1_Q
AX1A0003.LP1
AXIS1A0003_LPT1