Axis 5400 User Manual page 23

AXIS 5400+ User's Manual
Methods for setting
the IP Address
The IP address of your AXIS 5400+ can be set using the following
methods, depending on your network operating environment:
Network
Method
environments
Windows
AXIS Print System
95/98/NT/2000
AXIS IP
Windows
JumpStarter
95/98/NT/2000
Windows
NT/2000,
DHCP*
UNIX, Net-
Ware 5, OS/2
Windows
95/98/NT/2000,
OS/2
ARP
UNIX
UNIX
RARP*
UNIX, Net-
BOOTP*
Ware 5, OS/2
Windows
95/98/NT/2000,
AXIS NetPilot
NetWare 5
Windows
Auto-IP*
98/2000,
*The IP-address of your print server is set automatically when using
these methods.
Notes:
The ARP and RARP methods operate on single network segments only, i.e. they
cannot be used over routers.
Refer to Setting Parameters, on page 76 for information about setting the IP
address in the Macintosh environment.
Section 3: Basic Installation
See ...
Set the print server's IP address using
AXIS Print System version 1.20, on page
25
Set the print server's IP address using
AXIS IP JumpStarter, on page 26
Setting the print server's IP address
using DHCP, on page 27
Setting the print server's IP address
using ARP in Windows and OS/2, on
page 28
Setting the print server's IP address
using ARP in UNIX, on page 29
Setting the print server's IP address
using RARP in UNIX, on page 29
Setting the print server's IP address
using BOOTP in UNIX, on page 30
Assigning an IP address, on page 22
DHCP and Auto-IP, on page 31
23