How To Use It - Axis 5400 User Manual

AXIS 5400+ User's Manual

How to use it

Installation and
Integration
Configuration and
Management
The installation of the AXIS 5400+ and its integration into the
network is performed using the appropriate Axis client software,
which is provided on the Axis Product CD and the Axis
Communications web site:
• AXIS Print System (Windows 95/98, NT4.0 and 2000)
• AXIS Print Monitor (Windows NT 3.5x)
• AXIS Print Utility for Windows (Windows 3.1 and WfW)
• AXIS NetPilot™ (NetWare - IPX)
• AXIS Print Utility for OS/2
• axinstall (UNIX)
• AXIS Gateway Configuration Utility
Notes:
The AXIS 5400+ can be installed in the Macintosh environment without any
Axis client software.
The AXIS 5400+ can be installed in NetWare - Pure IP environments with the
NetWare Administrator.
As the AXIS 5400+ comprises a built-in Web server, it can be
configured and managed directly from its internal Web pages, using
HTTP over TCP/IP. Access to the AXIS 5400+ via a Web browser
offers you a platform-independent management tool that is suitable
for all supported network environments.
In TCP/IP networks you can also use AXIS ThinWizard, which
provides you with remote management capabilities for your AXIS
ThinServer devices.
If your network does not support TCP/IP, you can use AXIS NetPilot
to configure and manage the AXIS 5400+. AXIS NetPilot supports
communication via IPX/SPX and NetBIOS/NetBEUI.
Section 1: Introduction
11