Axis 5400 User Manual page 95

95
AXIS 5400+ User's Manual Section 9: Management & Configuration
Click the Admin button to enter the Admin mode. If the management
password is set to anything but , you must enter as the user
pass root
and the password. The password is the default password of the
pass
AXIS 5400+.
The AXIS 5400+ Administrator Home Page
The following services are available from the User mode. An
Available Services
additional link to the Axis home page is available from this mode.
from the User Mode
The Printer Overview page contains a section that allows you to view
the general parameter setting of the AXIS 5400+, including the print
server name and the location of the print server in your organization, if
defined.
If you have admin access rights you can use the Configuration Wizard
to perform basic configuration of the AXIS 5400+.
By clicking on the printer icon, a printer page opens, allowing you to
view the status and the supported capabilities of the connected printer.
The extent of this information is depending on the printer model.
From the printer page, you can also print a test page to the printer.