Axis 5400 User Manual page 64

Section 5: Setting Up - NetWare
64
5. Use the Add Printer Wizard on your workstation to install the
printer on your client. Note that only NDS queue based
PSERVER printing is supported. When installing, choose
Network Printer and browse to the queue you have just created.
Alternatively, choose Local Printer and select the queue you have
just captured.
Any configuration and management of the AXIS 5400+ can be
performed from any standard Web browser. Please refer to Using a
Web browser, on page 93.
If both the IPX and IP protocols are enabled in your network and the
print server uses DUAL_STACK (enabled by default) as its network
transport protocol, then IPX will be chosen. To force the print server
to use the IP transport protocol, go to your print server's web interface
and choose Admin | Detailed View | NetWare and change the
NetWare Transport Protocol from DUAL_STACK to IP_ONLY.
Save and exit when finished.
Important!
In order for the print server to log in using the IP protocol, RCONAG6.NLM has
to be loaded loaded on a file server in a specified tree. If you have multiple trees,
make sure that only the file server in the specific tree has RCONAG6.NLM
loaded.
Note:
Pure IP requires that you run NetWare 5 or higher.
AXIS 5400+ User's Manual