Axis 5400 User Manual page 86

Section 8: Setting Up - UNIX
86
Adding Strings Before
and After Print Jobs
Example:
Example:
4. Click OK when finished.
The ISO 8859-2 printer data that is sent to logical printer PR1
converts to IBM PC Set 2.
These string functions provide a way to send printer control
commands before and after each print job. They may be specified
individually for each logical printer.
All strings are entered as hexadecimal byte values.
Assume that the logical printer PR5 is configured as a PostScript
printer and that you want to append the PostScript End of File
character (hex ) after each print job.
04
Follow the instructions below to add a string after the print job:
1. From the print server's internal web page, select Admin | Logical
Printer Settings.
2. Select the Printer5 tab.
3. Enter the string 04 in the String After Print Job text field.
4. Click the OK button when finished.
You have an HP LaserJet printer with dual input bins, and want to
print on pre-printed forms when using the logical printer PR4. The
standard forms are taken from bin 1, and the pre-printed forms are
taken from bin 2. The string before print job should contain the
command to select bin 2,
after print job should contain the command to select bin 1,
(hex
1B 26 6C 31 48
Follow the instructions below to add strings before and after the print
job:
1. From the print server's internal web page, select Admin | Logical
Printer Settings.
2. Select the Printer4 tab.
AXIS 5400+ User's Manual
E (hex
l4H 1B 26 6C 34 48
C
).
), and the string
E
l1H
C