Axis 5400 User Manual page 151

151
AXIS 5400+ User's Manual Section 14: Technical Specifications
Netscape Navigator 4.0 and higher and MS Internet Explorer 4.0 and
WWW:
higher.
Supported Protocols
IPX, SAP, RIP, SPX, SNMP, NCP (extended with NDS), NLSP,
NetWare:
DIAG, TCP/IP.
NetBIOS/NetBEUI or TCP/IP, WINS.
Windows and OS/2:
NetBIOS/NetBEUI.
LANtastic
LPD, FTP, Telnet, Reverse Telnet, PROS, BOOTP, ARP, RARP,
TCP/IP:
DHCP ICMP, Auto-IP, IP, TCP, UDP, HTTP, SNMP, TFTP,
SLPv2, Dynamic DNS, IPP.
AARP, ATP, DDP, NBP, PAP, RTMP, ZIP.
Apple EtherTalk:
Network SNMP-MIB II compliant (over UDP/IP and IPX), host resource MIB
compliant (over UDP/IP and IPX), private enterprise MIB included.
Management
LAN Network Manager for OS/2. Print server status in
NWAdmin/PCONSOLE.
32 bit 100 MHz RISC Controller, 1 Mbyte Flash memory. 2 MB
Hardware
RAM.
NWay support to provide auto-detection of the network speed.
Logical Connection
Running simultaneously any combination of the supported protocols.
Use of IEEE802.2, IEEE802.3, SNAP and Ethernet II frame types
simultaneously.
Attachments RJ-45 connector (Category 5 Unshielded Twisted Pair) for 10baseT
Ethernet and 100baseTX Fast Ethernet.