Axis 5400 User Manual page 104

Section 9: Management & Configuration
104
The Parameter
List Editor
Important:
Modifying the
environments
3. Select the tab that includes the parameter you want to change.
4. Change the value.
5. Click Apply to save the change to the print server. (If you select
OK instead, the Property pages closes automatically after the
change has been saved).
The Parameter List Editor is a simple editor that enables you to:
• Edit the AXIS 5400+ config file.
• Save customized config files to your hard disk.
• configure several network print servers simultaneously.
Follow the instructions below to use the Parameter List Editor:
1. Choose Edit Parameter List from the Setup menu.
2. Download a config file from a print server or from your hard disk
by selecting from File or from Print Server.
3. Click the Load button and the config file opens in the editor.
4. Edit the config file.
5. Select the appropriate radio button, To File or To Print Server.
6. Click Save after you have made your choice, to save the modified
config file.
When saving the config file to multiple print servers, make sure that you do not
assign the same IP address to different print servers.
From the Network Environment window you can modify the network
settings for each supported network environment.
network
To gain access to the Network Environment window, follow the
instructions below:
1. Select the AXIS 5400+ from the 'Network Print Servers' folder.
AXIS 5400+ User's Manual