Axis Print System Version 1.20 Overview - Axis 5400 User Manual

AXIS 5400+ User's Manual

AXIS Print System Version 1.20 Overview

Peer-to-Peer Printing
If you intend to use the AXIS 5400+ in a multiprotocol environment,
you should also refer to the following sections:
Section 5 Setting Up - NetWare, on page 53
Section 6 Setting Up - OS/2, on page 66
Section 7 Setting Up - Macintosh, on page 72
Section 8 Setting Up - UNIX, on page 78
AXIS Print System version 1.20 is described in this User's Manual. To
obtain information on earlier AXIS Print System versions, see earlier
revisions of this User's Manual, available on the Axis Comunications
web site: http://www.axis.com
AXIS Print System is the recommended tool to use for network
printing over TCP/IP in Windows 95, Windows 98, Windows NT
4.0 and Windows 2000. Printers that you install from AXIS Print
System are automatically added to Start | Settings | Printers in
Windows. AXIS Print System has been developed for peer-to-peer
printing, allowing your print jobs to be sent directly to the AXIS
5400+.
AXIS Print Monitor is integrated into AXIS Print System and is
recommended for NetBIOS/NetBEUI printing.
In a Peer-to-Peer network, AXIS Print System needs to be installed on
each workstation. Once installed, AXIS Print System allows you to
access all network printers, just as if they were connected directly to
your workstation. Peer-to-peer printing offers the following benefits:
• You can easily monitor the status of your printers
• You do not have to rely on a server.
Section 4: Setting Up - Windows
33