Axis 5400 User Manual page 61

AXIS 5400+ User's Manual
3. Click the Connect... button. The Connect NetWare Print
Queues window appears.
The AXIS NetPilot Connect NetWare Print Queues window
4. Select the tree or server location of the print queue from the
Resources box.
5. Select an existing print queue to connect to the server port, or
create a new print queue by clicking on Create Queue... If you
have selected an existing queue, advance to step 8. Continue with
step 6 only if you want to create a new queue.
6. Type the queue name in the Create Queue dialog window. If you
want to create a queue in the NDS tree you must also enter the
name of the volume where the queue will be located. Click OK.
7. Select the newly created queue from the queue list.
8. Select Print Server Mode or Remote Printer Mode. If you
selected Print Server Mode, advance directly to step 11, otherwise
continue with step 9. Please refer to Queue-based Printing
Methods, on page 65, for further information about the two
printing methods.
Section 5: Setting Up - NetWare
61