Axis 5400 User Manual page 79

AXIS 5400+ User's Manual
Integration into the
Host Printer Spooler
To integrate the AXIS 5400+ into the host printer spooler, you can
use the auto installation script axinstall, resident in the AXIS 5400+.
Follow the instructions below to install axinstall onto your host using
FTP:
1. Login to the AXIS 5400+ using the command:
ftp <host name>
2. Enter as the user id and
root
3. Download the script using the command:
get axinstall
Log out using the command
FTP version.
> ftp npserver
connected to npserver.
220 AXIS 5400+ FTP Print Server v6.20 Jan 01 2001
ready.
Name (npsserver:thomas): root
331 User name ok, need password
Password: pass
230 User logged in
ftp> get axinstall
200 PORT command successful.
150 Opening data connection for axinstall
(192,36,253,4,13,223), (mode ascii).
226 Transfer complete.
local: axinstall remote: axinstall
61187 bytes received in 14 seconds (4.2 kbytes/s)
ftp> bye
221 Goodbye.
>
Typical FTP session for collecting the axinstall script
Section 8: Setting Up - UNIX
or
ftp <IP address>
as the password.
pass
or
quit, bye exit
(not visible)
depending on your
79