Axis 5400 User Manual page 50

Section 4: Setting Up - Windows
50
Client-Server Printing:
Server Setup
Notes:
AXIS Print Utility for Windows must be running when you print through your
AXIS 5400+. It is strongly recommended that you copy the AXIS Print Utility
icon into your StartUp folder.
To enable TCP/IP printing in Windows 3.1 and Windows for Workgroups
environments, you must use a shareware LPR spooler that can be downloaded
from ftp://ftp.axis.com/pub/axis/software/prt_srv/utility/wlprs/.
.
Follow the instructions below to install your AXIS 5400+ for client-
server printing at a Windows for Workgroups server:
1. Choose a workstation that you want to use as a server for network
printing. The server must be available at all times and must have
sufficient hard disk space for spooling print jobs.
2. Open Network Setup, click Sharing..., check the I want to be
able to allow others to print to my printer(s) box.
3. Install AXIS Print Utility for Windows on the server.
4. Set up your AXIS 5400+ as described under Peer-to-Peer Printing,
on page 49.
5. Open Print Manager and select your printer.
6. In the Printer menu, select Share Printer As...
7. Type a printer name in the Share As field (this is the printer name
seen by the clients, see Client Setup below).
Check the Re-share at Startup box, then click OK.
The server setup is now completed.
Note:
The AXIS Print Utility for Windows must be running when you print through
your AXIS 5400+. It is strongly recommended that you copy the AXIS Print
Utility icon into your StartUp folder.
AXIS 5400+ User's Manual