Section 13: The Parameter List - Axis 5400 User Manual

AXIS 5400+ User's Manual
Section 13The Parameter List
The Config File
--- GENERAL MENU
NODE_ADDR.: 00 40 8C 10 00 86
NETWORK SPEED: AUTO_SENSE, (AUTO_SENSE, 10_HALF_DX, 10_
FULL_DX, 100_HALF_DX, 100_FULL_DX
PS_NAME.: AXIS100086
ROOT_PWD.: pass
USERS.:
BASE_URL.: www.axis.com
CHARSET: ISO-8859-1 (ISO-8859-1, UTF-8)
LANG.: English (English, German, French, Spanish)
AXIS_PRINT_SYSTEM.: YES
HP_JETADMIN.: NO (YES, NO)
DEF_OUT.:PR1 (PR1, PR2, PR3, PR4, PR5, PR6, PR7, PR8,
LPT1)
SYS_LOC.:
SYS_CONT.:
This appendix provides an overview of the AXIS 5400+ parameters.
Please refer to the AXIS Network Print Server Technical Reference for
a complete description of the parameters. Alternatively, you can access
the Axis web site http://www.axis.com, where you can download the
latest technical information.
The left-hand column shows the parameters and their default values as
they appear in the config file and the right-hand column shows the
name of the parameters as they appear in the internal Web pages.
After you have changed them, most parameters take effect for the next
print job. If Requires Restart appears in a parameter description, you
must restart the AXIS 5400+, before the new setting for that
parameter takes effect.
Please refer to Section 9 Management & Configuration, on page 92, for
more information about how to change the parameters.
Note:
The password parameters, ROOT_PWD and PROS_PWD only appear when
you are logged in to the AXIS 5400+ using root. The password parameters will
not be printed when you are printing the parameter list using the test button.

Section 13: The Parameter List

Node Address
Network Speed
Print Server Name (100086 are the last six digits of the serial number)
Root Password
User and Printer Access List
Base URL
Character Settings
Language Menu
Enable compatibility with AXIS Print System
HP JetAdmin Support
Internal Printout Destination
System Location
System Contact
143