Axis 5400 User Manual page 35

AXIS 5400+ User's Manual
Changing print server
settings
Search for Print
Servers on Your
Network
3. When you are finished the printer will be installed on your
computer. You can see the printer in the My Printers window of
AXIS Print System as well as in the Printers folder of the
Windows operating system.
Select Add (Custom) to My Printers in Step 2 if you want to share the
printer with other users (only for Windows NT and Windows 2000)
or change any of the pre-defined settings prior to installation.
If you want to change the default name or the password of the AXIS
5400+, click Printer | Web Configuration from the AXIS Print
System interface. This will launch a web browser, displaying the
internal web pages of your Axis print server. From the user-mode,
click the Configuration Wizard for assistance. Refer to Using a Web
browser, on page 93 for detailed information.
If you wish to use an Axis print server/network printer that does not
appear in your Available Printers/Print Servers view, proceed with the
following steps:
1. Choose Printer | Add Undetected Printer. A wizard will open.
2. Enter the IP address and TCP port number of the print server and
click Next.
3. Next, the wizard will suggest a suitable driver for the network
printer you wish to install. Follow the instruction on the screen to
finish the configuration. The network printer will show up in the
My Printers view when the configuration is complete.
Print servers that contain old firmware (pre-6.00), will NOT show up
in the Available Printers/Print Servers view. The best way to solve
this is simply to upgrade the print server with firmware 6.00 or higher,
which can be obtained (free of charge) from the Axis Communications
web: http://www.axis.com
Section 4: Setting Up - Windows
35