Axis 5400 User Manual page 144

Section 13: The Parameter List
144
--- TCP/IP MENU
TCP_ENB.: YES
INT_ADDR.: 0 0 0 0
DEF_ROUT.: 0 0 0 0
NET_MASK.: 0 0 0 0
PROS_PWD.: netprinter
PROS_PRT.: 35
LPD_BANN.: OFF (OFF, AUTO, LAST)
DHCP_ENB.: YES
AUTOIP_ENB.: YES
BOOTP_ENB.: YES
RARP_ENB.: YES
WINS_ENB.: YES
WINS_ADDR1.: 0 0 0 0
WINS_ADDR2.: 0 0 0 0
NBT_SCOPE_ID.:
DNS_ENB.: YES
DNS_ADDR1.: 0 0 0 0
DNS_ADDR2.: 0 0 0 0
DOMAIN_NAME.:
SMTP SERVER:
SLP_SCOPE_LIST.: DEFAULT
RTN_OPT.: NO
RTEL_PR1.: 0
RTEL_PR2.: 0
RTEL_PR3.: 0
RTEL_PR4.: 0
RTEL_PR5.: 0
RTEL_PR6.: 0
RTEL_PR7.: 0
RTEL_PR8 : 0
--- SNMP MENU
READ_COM.: public
WRT_COM.: pass
TRAPADDR.: 0 0 0 0
TRAP_COM.: public
SYS_NAME.:
SNMP_AUT.: DISABLE
TRAP_PRT.: DISABLE
--- NETWARE MENU
NETW_ENB.: YES
NETW_TRANSPORT_PROTOCOL.: DUAL_STACK (IPX_ONLY,IP_ONLY,
DUAL_STACK)
JOB_CHECK_DELAY.: 5
CONF_CHECK_DELAY.: 300
FR_802_3.: YES
FR_ETH_2.: YES
FR_802_2.: YES
FR_SNAP.: YES
NCP_BURST_MODE.: YES
(DISABLE, ENABLE)
(DISABLE, ENABLE)
AXIS 5400+ User's Manual
TCP/IP Enabled
Internet Address
Default Router Address
(0.0.0.0 for no router)
Net Mask
(e.g. 255.255.255.0 for class C, 0.0.0.0 for auto-sense)
PROS Password
PROS TCP Port Number
LPD Banner Page Mode
DHCP Enabled
Auto-IP enabled
BOOTP Enabled
RARP Enabled
WINS Enabled
Primary WINS Server Address
Secondary WINS Server Address
NBT Scope ID
(Defines the NetBIOS scope to be used with WINS name registration)
DNS Enabled
Primary DNS Server Address
Secondary DNS Server Address
Domain Name (Defines the domain to which the AXIS 5400+ belongs)
Mail Server that uses Simple Mail Transfer Protocol.
Defines the SLP scope to which the AXIS 5400+ belongs.
Reverse Telnet Options Enabled
PR1 Reverse Telnet Port Number
PR2 Reverse Telnet Port Number
PR3 Reverse Telnet Port Number
PR4 Reverse Telnet Port Number
PR5 Reverse Telnet Port Number
PR6 Reverse Telnet Port Number
PR7 Reverse Telnet Port Number
PR8 Reverse Telnet Port Number
Read Community
Read/Write Community
Trap Address
Trap Community
System Name
Authentication Failure Trap
Printer Failure Trap
NetWare Enabled
NetWare Transport protocols Enabled
Job Check Delay
(Print Server queue polling interval)
Configuration Check Delay
(Interval between automatic configuration checks)
IEEE 802.3 Frame Type Enabled
Ethernet II Frame Type Enabled
IEEE 802.2 Frame Type Enabled
SNAP Frame Type Enabled
NCP Burst Mode Enabled (Requires Restart)