Section 12: Test Button - Axis 5400 User Manual

AXIS 5400+ User's Manual
Section 12Test Button
The Test Page
The Parameter List
The test button is located on the front right hand side of the AXIS
5400+ and is used for:
• Printing a test page, checking the connection to the printer.
• Printing a parameter list, showing the AXIS 5400+ current
settings.
• Resetting the AXIS 5400+ parameters to the factory default
settings.
Press the test button once to print a test page. If the test page prints,
the parallel interface is functioning correctly. The printed Test Page
contains basic information about the AXIS 5400+. It is recommended
that you print a test page every time you have connected the AXIS
5400+ to a printer.
Press the test button twice to print a parameter list showing the
current AXIS 5400+ settings. This list provides comprehensive details
of all the parameters and their current status. Refer to
Section 13 The Parameter List, on page 143.
If you want to change any of the parameters, use one of the methods
described in Section 9 Management & Configuration, on page 92.

Section 12: Test Button

141