Setting Up - Macintosh; Installation Using The Chooser Window; Section 7 Setting Up - Macintosh - Axis 5400 User Manual

Section 7: Setting Up - Macintosh
72

Section 7 Setting Up - Macintosh

Installation Using the Chooser Window

Basic Configuration
Having connected the AXIS 5400+ to your network as described in
Basic Installation, on page 18, this section now describes how to set up
your AXIS 5400+ for printing in Macintosh environments using
AppleTalk.
If you intend to operate your AXIS 5400+ in a multiprotocol
environment, you should also proceed to the other relevant sections in
this manual, namely:
Section 5 Setting Up - NetWare, on page 53
Section 4 Setting Up - Windows, on page 32
Section 6 Setting Up - OS/2, on page 66
Section 8 Setting Up - UNIX, on page 78
Basic configuration in AppleTalk is performed simply by opening the
Chooser window and selecting a printer.
You can change the default name of your AXIS 5400+ or any of
default parameters by editing the config file. To access the config file
from a Macintosh, you can use:
• any Java enabled Web browser
• FTP using MacTCP, Fetch or Anarchie
In order to use any of the methods, you must assign an IP address to
the AXIS 5400+ as described in Setting Parameters, on page 76.
AXIS 5400+ User's Manual