Axis 5400 User Manual page 43

AXIS 5400+ User's Manual
3. Choose an appropriate printer driver for your printer from the
drop-down Driver list. If the desired printer driver already appears
in the displayed Manufacturers and Printer Models list dialog,
proceed directly to step 6. It is only necessary to perform steps 4 -
5 if your printer does not appear in the model list.
Note:
Even if the desired printer is available in the Manufacturers and Printer Models
list, you are advised to use the printer driver provided with your printer. This
assures you of the latest driver software.
4. Select Other... in the driver list. Insert the printer driver
diskette/CD that was provided with your printer, select the
diskette/CD drive and click OK.
5. Select the printer driver you want to install.
6. Select Other... from the "Print to" drop-down list.
7. Select AXIS Port from the list of available Print Monitors in the
Print Destination dialog. Click OK.
8. Select LPR (TCP/IP) as your choice of network protocol and
click OK.
9. From the Add LPR port dialog, enter the IP address or host name
of your print server and define a Logical printer name. Click OK
to return to the Create Printer dialog.
10. Select the AXIS LPR port you wish to use from the "Print to"
drop-down list. The ports appear as <port name>@<IP address>
or <port name>@<host name>,
e.g. PR1@192.36.254.101.
11. Click the Settings button. Choose whether error condition pop-
up messages are to be displayed by checking the box in the
Configure AXIS LPR Ports dialog. Define the frequency at which
the error messages should be displayed after retry. Click OK to
return to the Create Printer dialog.
12. Having selected and configured the chosen port, click Next>.
Section 4: Setting Up - Windows
43