•
This is the default setting. It offers
sufficiently accurate calculation of the
ETA for most drivers.
•
This setting indicates to the Traffic Pro
that you will need a little longer for the
planned route. This setting could be
selected, for example, for a slower
vehicle or in dense traffic areas.
•
Select this option to modify the calcu-
lation of the ETA to suit your require-
ments.
Note:
Only one of the two settings may be
active ( ) at the same time.
X
Turn the rotary control/push button
to activate the required setting ( ).
If
is selected, you still need to
select the required setting. The available
range is between 50% and 200%.
A value of 100% indicates the
ting. A later ETA will be calculated if a
higher percentage value is selected.
2093
X
Turn the rotary control/push button
to set the required percentage value.
X
Confirm your selection by pressing
the rotary control/push button
Navigation mode
Measuring unit
You can convert the calculation of the
distances from metric (display in metres
set-
and kilometres) to imperial (display in
yards and miles) system and vice versa.
In the Settings menu, select the
X
entry.
2094
X
Confirm your selection by pressing
.
the rotary control/push button
2095
X
Select
or
Note:
Only one of the two settings may be
active ( ).
.
(on =
).
57