Table of Contents
Advertisement
If
Set freečy
is selected, you still need to
select the required setting. The available
range is between 50% and 200%.
A value of 100% indicates the
ting. A later ETA will be calculated if a
higher percentage value is selected.
2093
Turn the rotary control/push button
!
to set the required percentage value.
!
Confirm your selection by pressing
the rotary control/push button
Measuring unit
You can convert the calculation of the
distances from metric (display in metres
Car
set-
and kilometres) to imperial (display in
yards and miles) system and vice versa.
In the Settings menu, select the
!
measure
entry.
2094
Confirm your selection by pressing
!
.
the rotary control/push button
2095
Select
Metric
or
!
Note:
Only one of the two settings may be
active ( ).
Unit of
.
Imperiač
(on =
).
Navigation mode
61
Advertisement
Table of Contents
