Information During Route Guidance; Displaying Destination Information; Displaying/Storing Position - Becker Cascade Operation Manual

Information during route
guidance
Displaying destination
information
! Press .
! Turn the rotary control/push button
clockwise until Destination
on the top right of the display.
2076
The following information appears:
• On the top left, the destination town
and destination road.
• To the left underneath the destination
town, the average speed thus far.
• Above the image of the car, the
distance still to be travelled and the
anticipated time of arrival.
• To the left and right of the image of
the car, the distance already travelled
and the journey time thus far.
Notes:
• If a stopover is active, information
about it is displayed.
the display above the car.
• Press the rotary control/push button
to reset the values for the average
speed, distance travelled and journey
appears
time thus far to zero.
• By pressing the
long time you can obtain a display of
all the information concerning the
destination shown.
• Exit the destination information by
pressing the

Displaying/Storing position

! Press
! Turn the rotary control/push button
appears on
clockwise until
top right of the display.
2077
button for a
The following information appears:
• If possible, the town and road/geo-
graphical coordinates and height above
sea level (only in the event of sufficient
satellite reception) appear on the left-
button.
hand side of the display.
• The number of satellites which have
been/can be received appears above
the image of the car.
Navigation mode
.
Position appears on the
53