Terminating A Call; Accepting A Call; Rejecting A Call; During A Call - Becker Online Pro 7800 Operating Manual

Terminating a call

An ongoing call or dialling can be terminated.
To do this, briefly press the right rotary control
or the multifunction button in the Call menu.
The call or dialling will be terminated.

Accepting a call

To accept an incoming call, briefly press the right
rotary control , press multifunction button
or remove the handset (optional accessory) from
its cradle.
Instead of Phone call! , the name or number of
the person calling can be displayed if available.
Note:
Incoming calls will only be signalled when the tel-
ephone is turned on and activated (PIN number en-
tered).

Rejecting a call

To reject an incoming call, press multifunction
button . The person calling will hear a busy
signal.

During a call

It may be necessary to enter numbers or characters
during a call. This may be required to control an
available voice mailbox, depending on the
network provider.
Press the multifunction button
right rotary control .
A number can be entered during a call by pressing
the multifunction buttons through
This may be necessary for example, depending
upon the provider, to control an available voice
mailbox.
The call is transferred to the handset by removing
the handset from its cradle (optional accessory).
The unit will then return to the previously active
audio source.
Toggling – second call
If the call waiting function is activated (see "Call
settings" on page 136.), a further call is signalled
during an ongoing call.
• The new call is accepted by pressing the
multifunction button
put on hold in the background. You can then
toggle between these two calls.
• The new call is accepted by pressing the
multifunction button
or turn the
ended.
• By pressing the multifunction button
new incoming call is rejected. The caller hears a
busy tone.
During two concurrent calls, you can toggle
between the two calls or end a call.
.
Telephone mode
, the current call is
. The current call is
the
129