Install Options And Values; Language; Tear; Single Sheet Load - Genicom LA36 User Manual

Using Set-Up Mode

INSTALL Options and Values

• Overprinted values are the factory settings.
I N S T A L L
Options
<LANGUAGE>
<TEAR>
<S-SHEET LD>
(Single Sheet
Load)
<ERROR BEEP>
4-26
Values Description
Specify a language to be used to print the Set-Up
menu functions and options.
English
ENGLISH
German
DEUTSCH
Spanish
ESPANOL
French
FRANCAIS
Italian
ITALIANO
Specify the (auto) start timing of tear off feeding.
AUTO 1 SEC 1 second after data stops from the computer
AUTO 2 SEC 2 seconds after data stops from the computer
AUTO 3 SEC 3 seconds after data stops from the computer
AUTO 4 SEC 4 seconds after data stops from the computer
AUTO 5 SEC 5 seconds after data stops from the computer
Feed the paper for tear-off when the
MANUAL
pressed.
Tear off feeding is inhibited under any conditions.
NO TEAR
Specify this setting for labels that tend to peel off
during backward feeding.
Specify the (auto) start timing of single sheet loading.
AUTO 1 SEC 1 second after a single sheet is set on the platen
AUTO 2 SEC 2 seconds after a single sheet is set on the platen
AUTO 3 SEC 3 seconds after a single sheet is set on the platen
AUTO 4 SEC 4 seconds after a single sheet is set on the platen
AUTO 5 SEC 5 seconds after a single sheet is set on the platen
Load a single sheet when the
MANUAL
pressed.
Enable or disable the printer status buzzer when a
fault condition occurs.
One beep for a period of about 500 ms
ONE
CONTINUOUS Buzzer on until the fault condition is cleared
Buzzer off under any condition
OFF
button is
Pause
button is
FF/Load