Overview Of Paper Operations - Genicom LA36 User Manual

Paper Handling

Overview of Paper Operations

The following levers and buttons are used in paper handling:
Paper select lever 1 1 1 1 1 at the top left corner of the printer
•
Paper thickness lever 2 2 2 2 2 at the top right corner of the printer
•
All buttons 6 6 6 6 6 on the control panel 3 3 3 3 3 (Primary and alternative functions are labelled
•
respectively above and under each button.)
The following figure shows the location of each lever, indicators, and buttons:
4 4 4 4 4
Courier 10
Draft
HSDraft Prestige 12
HiDraft
Comp. 17
Ready
Pause
Set-Up/Quit
The following table summarizes the use of levers and buttons in paper handling. More
detailed information is provided later in this chapter.
Caution: To load or feed paper, the printer must be:
• In the Ready state but not receiving or printing data
• In the Pause state
2-8
1 1 1 1 1
3 3 3 3 3
5 5 5 5 5
Fault
Bold PS
EP2
Time PS
PPX24
M1
Nimb. PS
Soft Ctrl. M2
Font Protocol
Macro
M1
Top
6 6 6 6 6
Paper select lever 1 1 1 1 1
Paper thickness lever 2 2 2 2 2
Control panel 3 3 3 3 3
Printer Levers and Buttons
Park LF FF/Load
M2
Exit/Save
Font indicators 4 4 4 4 4
Macro indicators 5 5 5 5 5
Buttons 6 6 6 6 6
2 2 2 2 2