Options With Pre-Determined Values - Genicom LA36 User Manual

Using Set-Up Mode
The first four Macro 1 options and their values are shown below. Options are shaded
and skipped when they are not objects of selection because of the preceding option
setting.
< P R O T O C O L >
DEC PPL2 IBM PPX24 EPSON-ESCP AUTO
<PRTCL SERL>
DEC PPL2__ IBM PPX24 EPSON-ESCP
<PRTCL PARL>
DEC PPL2 IBM PPX24 EPSON-ESCP
<FONT>
DRAFT HIDRAFT
NIMBUS-SAN OCR A
3. Pressing and holding down the
letting you skip selection of values so that you can reach the desired option quickly.
<FUNCTIONS>
MACRO 1 MACRO 2 PRINT
<PROTOCOL>
<PRTCL SERL>
<PRTCL PARL>
<FONT>
<HORZ PITCH>
<VERT PITCH>
<VERT PITCH>
2 LPI 3 LPI
The current option and its values are reprinted when the

Options with Pre-determined Values

For some options, you can choose among a limited set of pre-determined values. To select
such a value:
1. Repeatedly press the
plastic print guide under the value you require.
2. Press the button to select the value. The printer prints the next option and its values.
You can press the
option and its values.
4-6
PORT DEPND
HI-IMPACT COURIER PICA
OCR-B
or
INSTALL ADJUST TESTS
PORT DEPND
DEC PPL2
EPSON-ESCP
DRAFT
10 CPI
6 LPI
4 LPI 6 LPI 8 LPI
button or the
button to select the value. Then the printer prints the previous
PRESTIGE COMPRESSED BOLDFACE
button prints options and their current values
RCALL-FACT MENU-ACCESS SAVE&EXIT
12 LPI 1 LPCM
or
button to position the red cursor on the
TIMELESS
2 LPCM 4 LPCM
button is released.