Control Panel Operations - Genicom LA36 User Manual

Control Panel Operations

— : This operation has no connection with this condition.
N/A : The condition does not apply because this operation is executed before powering
on.
Operation
Load continuous forms paper
Load single sheet paper
Feed paper a page
Feed paper a line
Advance perforation to tear bar
Advance paper for viewing
Return paper to previous position —
Eject single-sheet paper
Unload continuous-forms
*3
paper
Pause printing
Resume printing
Resume printing after a fault
Resume printing after paper-out
Place printer in Ready state
Place printer in pause state
Enter Normal mode
Printing test
*1
Required Conditions
*2
Ready Printing
— Not printing
— Not printing
— Not printing
— Not printing
— Not printing
— Not printing
Not printing
— Not printing
— Not printing
On Printing
Blinking Not printing
Off Not printing
Off Not printing
Off Not printing
On —
N/A N/A
N/A N/A
Paper Handling
Required Action
Fault
On Press FF/Load .
On Press if single sheet
FF/Load
load is switched from AUTO
to MANUAL in Set-Up mode.
Off Press .
FF/Load
Off Press .
LF
Off Press if the TEAR
Pause
option is switched from AUTO
to MANUAL in Set-Up mode,
or
press FF/Load.
Off Press if the TEAR
Pause
option is switched from AUTO
to MANUAL in Set-Up mode.
Off Press if the TEAR
Pause
option is switched from AUTO
to MANUAL in Set-Up mode,
or press FF/Load.
Off Press FF/Load or
the printer off and on again.
Off Press Park .
Off Press .
Pause
Off Press .
Pause
On Clear error and press
On Load paper.
Off Press Pause .
Off Press .
Pause
N/A Turn power on without
pressing any buttons
N/A Turn power on while pressing
.
FF/Load
Park or turn
.
Pause
2-5