Turning The Power On; Turning The Power Off - Roland VR-5 Owner's Manual

Turning the power on

* Once the connections have been completed (p. 10), turn on power to your various devices in the order specified. By turning on devices in the
wrong order, you risk causing malfunction and/or damage to speakers and other devices.
* Always make sure to have the volume level turned down before switching on power. Even with the volume all the way down, you may still
hear some sound when the power is switched on, but this is normal, and does not indicate a malfunction.
* This unit is equipped with a protection circuit. A brief interval after power up is required before the unit will operate normally.
Make sure the power cable is securely inserted, then press the [POWER] button located on the top panel. The button lights up and
the VR-5 starts.
fig.power-button.eps

Turning the power off

Press the [POWER] button on the top panel. At the screen on the right (OUTPUT MONITOR), the message "Press POWER Again !"
appears.
fig.power-off-message.eps
Pressing the [POWER] button again within 5 seconds after this message appears makes the button go dark and switches off the
power to the VR-5.
The "Press POWER Again !" message automatically disappears after 5 seconds. The power cannot be turned off unless the [POWER] button is
pressed within 5 seconds after the message appears.
Turning the Power On/Off
11