Roland VR-5 Owner's Manual page 32

Basic Operation
1.
Display the AUDIO MIX menu.
Use the View Mode buttons for the SETUP/PREVIEW MONITOR to select [AUDIO SETUP]. The audio-related menu appears.
fig.audio-setup-screen.eps
2.
Select the target channel.
Select the channel where you want to apply the effect. Select [MIC/LINE 1], [MIC/LINE 2], or [MASTERING].
Selecting [AUDIO INPUT] lets you choose the target channel for the link feature (p. 31).
3.
Select the effect to apply.
From among the effects listed on the previous page, select the effect to apply. You can make the selection by touching the touch
panel. The selected effect is displayed with a red border around it.
fig.select-audio-effect.eps
4.
Switch the effect on or off, or adjust it.
Turn the [VALUE] dial to switch the effect on or off. Adjust the amount of effect to be applied.
You can return to previous screen by touching the "Return" symbol.
fig.return.button-eps
5.
Go back to the original screen.
Press the [VIDEO PREVIEW] button to exit the menu screen. This returns the display to the original four split screen.
fig.video-preview-button.eps
32