File Playback - Roland VR-5 Owner's Manual

Performing Playback from an SD Card

File Playback

Never eject an SD card during playback. Doing so might cause data loss on the SD card. Turning off the power of this unit during playback may cause
the same problem.
1.
Select the type of file to play.
Press one of the [FILE SELECT] buttons to select video (VIDEO), still images (PICTURE), or audio (AUDIO) as the type of file for
playback. Pressing one of the buttons displays a list of playable files on the SETUP/PREVIEW MONITOR.
fig.file-select.eps
* Inputs from sources do not appear on the SETUP/PREVIEW MONITOR while this menu is displayed. You can use an external preview monitor to
view your video sources during menu operation. While inputs are not shown, you can use the [VIDEO SELECT] buttons to switch the video.
* If the SD card is not recognized by the VR-5 or is corrupt, the message [MEDIA FOUND OR DAMAGED] is displayed. If this happens, try ejecting
and reinserting the SD card. If the same appears after reinserting, try replacing with a different SD card.
2.
Select the file to play back.
Use the touch panel to choose the file to play. Touching the icon for the file you want to play causes a red border to appear
around it and puts it in the selected state. By default, playback starts as soon as the file is selected.
* Instead of using the touch panel, you can also perform the same operation using the [VALUE] dial and the [ENTER] button.
* Touching a folder icon displays a list of the files contained in the folder.
fig.select-file.eps
3.
Quit the menu screen.
Press the [VIDEO PREVIEW] button to go back to the original four split screen.
* You can also go back to the original screen by pressing the [EXIT] button.
fig.press-VIDEO-PREVIEW.eps
4.
Output the played video or audio.
To output video, use the touch panel or the [VIDEO SELECT] buttons to select [PLAYER]. To output audio, go to the audio mixer
section and raise the [PLAYER] fader.
* You can change the setting to start playback when the [PLAYER] channel is selected. This is done in the FILE LIST screen (next page).
42