Roland VR-5 Owner's Manual page 27

Connecting an Amplifier/Speakers or Recorder
Connect an amplifier/speakers or a recorder to the AUDIO OUTPUT connectors. The AUDIO OUTPUT connectors include XLR and
RCA connectors, and both types output the same audio.
* The nominal output level of the VR-5 is -10 dBu. Connect equipment that supports input at -10 dBu.
fig.connect-speaker.eps
Connecting a Monitor Display
The VR-5 has two types of monitor output connectors.
HDMI OUT Connector
This provides digital output of the video and audio mix results.
* The signal output from the HDMI OUT connector is 480/59.94p (when set to NTSC) or 576/50p (when set to PAL).
* The aspect ratio of HDMI output is stretched from 4:3 to 16:9.
* You can use the menus to select final output or preview output as the source for HDMI output.
fig.connect-HDMI.eps
HDMI cable
PREVIEW OUT Connector
The same four split preview video shown on the SETUP/PREVIEW MONITOR is displayed. Connect a monitor display when you
want to view the preview video on a large screen.
* A monitor connected to the PREVIEW MONITOR connector does not display the menu screen of VR-5.
* When connecting a device equipped with RCA pin type connectors, use the included conversion plug.
fig.connect-monitor.eps
XLR cables
Amplifier
Composite cable (BNC)
RCA pin cables
1 2
3
PLAYER
Connecting External Equipment
Recorder
27