Turning On The Power - Roland V-Mixer VM-C7100 Quick Start Manual

Getting Started

Turning On the Power

After you have finished making connections (QUICK START: p.7), be sure
to turn on all of your devices in the proper order, as described in the
instructions below. Powering up in the wrong order may cause
malfunctions and/or damage to speakers and the devices.
Always make sure that each device's volume level is turned down before
turning on its power. You may hear a slight noise even with the volume
turned down – this is normal, however, and does not indicate a malfunction.
fig.007
1
Turn on the power of any connected digital multi-track tape
recorder.
It takes a while for the device to startup.
2
Turn on the power of any additional connected digital devices
(DAT, MD recorder, hard disc recorder, etc.).
3
Turn on the power of any connected analog devices
(instruments, sound modules, effects processors, microphones,
CD players, MD players, tape recorders, etc.).
10
If an external device is to be
the source of the system's
Owner's
Word Clock (
Manual
: p.31), turn on the
power of that device first.