Roland VR-5 Owner's Manual page 14

Names of Things and What They Do
9. INFO Button
Pressing this makes it light up and displays the following information on the OUTPUT MONITOR. Pressing it a second time makes
it go dark, and the displayed information disappears.
The information to be displayed when [INFO] is pressed has been changed as below from the shipped version.
• Current Status
• File Name
• Markers
• PLAY/REC time
• Seek Bar
While the seek bar is displayed, you cannot adjust size/position of the inset screen of picture in picture using touch panel. Close the seek bar
when you use touch panel for size/position adjustment (p. 35).
fig.info-display.eps
Status File Name
[INFO] x 1
10. USER LOGO Button (p. 53)
At times such as during intervals in a band performance, you can output a logo stored in the VR-5. Pressing this makes it light up
and switches from video output to output of the logo. Pressing it a second time makes it go dark and returns to the video output.
* Even during logo output, you can apply a fade-in or fade-out by operating the [VIDEO OUT] dial.
* By default, the logo stored in the unit is the "Roland" logo shown below. Outputting a user logo requires overwriting the logo data in the VR-5.
Refer to "Registering a User Logo" (p. 53).
fig.roland-logo-out.eps
14
This displays current status like playback (PLAY) or recording (REC).
During playback, this displays the name of the currently selected file.
During recording, this displays the file name to be assigned to the recording file (the date/time when recording
is started).
This displays the total number of added markers and the number of marker immediately before the current location.
When no marker has been added, "0/0" is displayed.
This displays the playback or recording time of the file in hour:minute:second (H:M:S) format.
This is displayed when [INFO] button is pressed twice. This displays progress of the currently playing file.
You can touch and move the green dot to change location to play.
Marker Time
Seek Bar
[INFO] x 2