Roland VR-5 Owner's Manual page 44

Performing Playback from an SD Card
Playback Modes
On the VR-5, you can select a playback mode. The playback modes cycle through the sequence shown below.
* By default, the mode is set to [ONE SHOT].
fig.play-mode.eps
ONE SHOT LOOP
• ONE SHOT
This plays the selected file one time only (one shot). When playback reaches the end and finishes, the [PLAYER] section of the SETUP/PREVIEW
MONITOR turns black.
• LOOP
This performs repeated (loops) playback of the selected file.
• SEQUENTIAL
This plays the files in the selected folder in sequence. When playback of the file immediately before the selected file finishes, the [PLAYER]
section of the SETUP/PREVIEW MONITOR turns black.
• FOLDER LOOP
This plays the files in the selected folder in sequence. This sequential playback is repeated (looped).
Search Buttons
You can use these for indexing during playback.
fig.transports.eps
• PREV
When a movie or audio file is selected, pressing this once jumps to the start position of the currently selected playback file. Pressing it twice
calls up the file just before the currently selected playback file.
When a still picture is selected, pressing this once calls up the file just before the currently selected file.
The files are arranged by file name (in numerical and alphabetical order).
• NEXT
This calls up the file just after the currently selected playback file.
• REW
This performs rewind playback, with each press increasing the speed in the sequence of 1.5X, 3X, 8X, and 16X. Pressing the button while
rewinding at 16X speed returns to normal playback.
• FWD
This performs fast-forward playback, with each press increasing the speed in the sequence or 1.5X, 3X, 8X, 16X, and 32X. Pressing the button
while fast-forward playback at 32X speed returns to normal playback.
* When a still image file is selected, REW and FWD have no effect.
44
SEQUENTIAL FOLDER LOOP