Rear Panel; Turning On/Off The Power; Ac Adaptor Jack - Roland Groovebox D2 Owner's Manual

Hide thumbs Also See for Groovebox D2:
Table of Contents

Advertisement

Rear panel

* To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices
before making any connections.
AC Adaptor
1. POWER switch
This turns the power on/off.

2. AC adaptor jack

Connect the supplied AC adaptor to this jack.
* To prevent the inadvertent disruption of power to your unit
(should the plug be pulled out accidentally), and to avoid
applying undue stress to the AC adaptor jack, anchor the
power cord using the cord hook, as shown in the illustration.
3. MIDI connectors (IN, OUT)
These connectors are used when you want to use the D2
to play external sound generating devices, or use an
external sequencer to play the D2's sound generator; or

Turning On/Off the Power

* Once the connections have been completed, turn on power to
your various devices in the order specified. By turning on
devices in the wrong order, you risk causing malfunction and/
or damage to speakers and other devices.
1. Make sure that all volume controls on the D2 and
connected devices are set to "0."
2. Turn on the D2's [POWER] switch.
3. Turn on the device connected to the OUTPUT Jacks.
4. Adjust the volume levels for the devices.
1
2
3
Cord hook
Panel Descriptions/ Making Connections
4
5
when you want to save or load D2 settings.
* For details concerning MIDI devices, refer to Chapter 8.
System Settings and MIDI Applications (p. 73).
4. OUTPUT jacks (L, R)
Connect these jacks to your mixer or amp.
5. Headphone jack
This jack accepts connection of a set of stereo
headphones. Sound will still be output from the
OUTPUT jacks even while headphones are connected.
6. Security Slot (
http://www.kensington.com/
* This unit is equipped with a protection circuit. A brief interval
(a few seconds) after power up is required before the unit will
operate normally.
Turning off the power
Before switching off the power, lower the volume on each of
the devices in your system and then TURN OFF the devices
in the reverse order to which they were switched on.
6
Stereo Headphones
To Mixer, Amplifier
)
11

Advertisement

Table of Contents
loading

Table of Contents