System Menu - Roland VR-5 Owner's Manual

Menu Operations and Menu List
AUDIO MIX Menu
This is for settings related to audio input/output and Audio Follow.
fig.audio-mix-menu.eps
MIC / LINE 1
MIC / LINE 2
AUDIO INPUT
MASTERING
* When the MONO setting is made, only the left-channel connectors are enabled. Right-channel connectors are disabled. The stereo position is
centered.

SYSTEM Menu

This is for making various system settings for the VR-5.
fig.system-menu.eps
SD CARD
MIDI SETUP
VIDEO/AUDIO
SYSTEM
INITIALIZE
64
HIGH PASS
This switches the high-pass filter on and off.
NOISE GATE
This adjusts the degree of application of the noise gate.
EQ Lo (dB)
This adjusts the degree of application of the low (low-band) equalizer.
EQ Hi (dB)
This adjusts the degree of application of the high (high-band) equalizer.
HIGH PASS
This switches the high-pass filter on and off.
NOISE GATE
This adjusts the degree of application of the noise gate.
EQ Lo (dB)
This adjusts the degree of application of the low (low-band) equalizer.
EQ Hi (dB)
This adjusts the degree of application of the high (high-band) equalizer.
FOLLOW CH1
This makes channel 1 the target of Audio Follow.
FOLLOW CH2
This makes channel 2 the target of Audio Follow.
FOLLOW CH3
This makes channel 3 the target of Audio Follow.
FOLLOW PLAYER
This makes PLAYER the target of Audio Follow.
ST/MONO CH1 (*)
This switches between stereo and mono on channel 1.
ST/MONO CH2 (*)
This switches between stereo and mono on channel 2.
ST/MONO CH3 (*)
This switches between stereo and mono on channel 3.
MASTERING EFF SW
This switches mastering effects on and off.
NOISE SUPPRESSOR
This adjusts the degree of application of the noise suppressor.
ENHANCER
This adjusts the degree of application of the enhancer.
MASTER Lo
This reduces low frequency (220 Hz or lower) distortion.
MASTER Hi
This reduces high frequency (2 kHz or higher) distortion.
LOAD PARAMETER
This calls up the settings saved on an SD card.
SAVE PARAMETER
This saves all current settings on an SD card.
FORMAT
This formats an SD card.
* For information about MIDI settings, download the separate reference materials for remote control
from the following Roland website.
http://www.rolandsystemsgroup.net/
LIP SYNC DELAY
This adjusts the amount of audio delay for lip-sync.
PHONES OUTPUT This selects whether headphones output is adjusted independently.
USB MODE
Select [STORAGE] when connecting a USB memory device.
Select [VIDEO OUT] sending output to a computer.
HDMI SOURCE
This selects the source (final output or preview) for HDMI output.
NTSC/PAL
This switches between NTSC and PAL.
LCD BRIGHTNESS
This adjusts the brightness of the LCD screen.
INFO POSITION This selects the location of displayed information (top or bottom).
TOUCH CALIBRATE
This calibrates the touch panel.
DATE & TIME
This sets the date and time of the internal calendar/clock.
FACTORY RESET
This returns the VR-5 to its factory-default state.
VIDEO MIX INIT
This returns only the VIDEO MIX settings to their factory-default state.
AUDIO MIX INIT This returns only the AUDIO MIX settings to their factory-default state.
SYSTEM INIT
This returns only the SYSTEM settings to their factory-default state.