Audio Mixer Section - Roland VR-5 Owner's Manual

Names of Things and What They Do

Audio Mixer Section

fig.audio-mixer-section.eps
1
2
3
4
5
1. GAIN Dial and SIG/PEAK Indicator for MIC/LINE 1
Use the [GAIN] dial to adjust the input sensitivity for the MIC/LINE 1 connectors. Adjust this to match the output from a connected
microphone or external mixer.
When input is present, the [SIG/PEAK] indicator lights up green. It lights up red when the input level is too high. If this happens,
the output may experience distortion. Lower the input sensitivity.
2. PAN Switch for MIC/LINE 1
This sets the stereo position for MIC/LINE 1 input. You can make the following three types of settings.
• L This sets the position at the left.
• MONO This sets the position at the center.
• R This sets the position at the right.
3. GAIN Dial and SIG/PEAK Indicator for MIC/LINE 2
Use the [GAIN] dial to adjust the input sensitivity for the MIC/LINE 2 connectors. The indicator is the same as for MIC/LINE 1.
4. PAN Switch for MIC/LINE 2
This sets the stereo position for MIC/LINE 2 input. The settings are the same as for MIC/LINE 1.
5. MIC/LINE 1/2 Faders
These adjust the levels of the audio inputs from MIC/LINE 1 and 2.
6. 1 - 3 Faders
These adjust the levels of the audio inputs from AUDIO INPUT connectors 1 through 3.
* Independent adjustment of left and right is not possible.
7. PLAYER Fader
This adjusts the level of the audio played back from an SD card.
16
6 7