Adjusting The Internal Calendar/Clock - Roland VR-5 Owner's Manual

Adjusting the Internal Calendar/Clock

The VR-5 has an internal calendar and clock. When recording is performed, the date and time from the calendar/clock are used as
the file name. We recommend setting the calendar and clock to match the country or region of use.
* The date and time when the recording starts are used as the file name.
1.
Display the menu.
Press the [MENU] button to access the menu screen.
2.
Access the SYSTEM menu.
Touch [SYSTEM] to access the SYSTEM menu.
3.
Display the calendar and clock.
From [SYSTEM], select [DATE & TIME]. The dialog box shown below appears.
fig.calender-clock.eps
4.
Adjust the date and time.
Turning the [VALUE] dial moves the cursor. Touch the numbers below to adjust the date and time. After adjusting, touch [OK] to
go back to the previous screen. Using [X] to return causes any changes to the date and time to be discarded.
5.
Go back to the original screen.
Press the [VIDEO PREVIEW] button to exit the menu screen.
If the power to this unit is not switched on for an extended period of time (about 6 months), the internal calendar and clock will be initialized.
When initialized, set the date and time again with above steps.
Other Features
59