Connecting Audio Equipment - Roland VR-5 Owner's Manual

Connecting Audio Equipment

Connecting Playback Equipment
Connect the audio output from video players, CD players, and other devices to the AUDIO INPUT connectors. When video output
from a player is connected to a VIDEO INPUT connector, make the connection to the AUDIO INPUT connectors that have the same
number.
* When making the connection, be careful to connect the left and right lines correctly.
fig.connect-DVD-player.eps
Player
Connecting Microphones
Connect microphones to the MIC/LINE INPUT 1 and 2 connectors. MIC/LINE INPUT provides two types of connectors (TRS and
XLR), and when connections are made to both at the same time, the TRS connection takes priority. When you are connecting a
condenser microphone or other device that requires a supply of +48 V phantom power, make the connection to an XLR
connector, and set the [PHANTOM +48V] switch to ON. When the switch is set to ON, the indicator next to the switch lights.
* Supplying +48 V phantom power to the TRS connectors is not possible.
* Supplying +48 V phantom power to just one connector (1 or 2) and not the another is not possible. When the switch is set to ON, power is
supplied to both connectors.
fig.connect-dyanamic-mic.eps
Dynamic Microphone
When you are connecting equipment that requires phantom power, connect the equipment first, then set the [PHANTOM +48V] switch to ON.
When you are connecting a dynamic microphone or other device that does not require power supply, be sure to set the [PHANTOM +48V] switch
to OFF. Making the connection while the switch is left set to ON may cause malfunction. (Phantom power on the VR-5: +48 V DC/maximum 14 mA
on each channel)
S-Video cable and
RCA pin cables
Connecting External Equipment
Condenser Microphone
25