Selecting A Location For The Printer - Xerox WorkCentre 6655i/X User Manual

Selecting a Location for the Printer

1. Select a dust-free area with temperatures from 5–32°C (41–90°F), and relative humidity 15–85%.
Note: Sudden temperature fluctuations can affect print quality. Rapid heating of a cold room can
cause condensation inside the printer, directly interfering with image transfer.
2. Place the printer on a level, solid, non-vibrating surface with adequate strength for the weight of the
printer. The printer must be horizontal with all four feet in solid contact with the surface. To find the
weight for your printer configuration, see
adequate clearance to access supplies and to provide proper ventilation. To find the clearance
requirements for your printer, see
3. After positioning the printer, you are ready to connect it to the power source and computer or
network.
Physical Specifications
Clearance Requirements on page 257.
® ®
Xerox WorkCentre 6655/6655i Color Multifunction Printer
Installation and Setup
on page 256. Select a location with
User Guide
37