Table of Contents
Advertisement
Selecting Features
Using a DFA Finishing Device
Jam clearance
Do c u Co lo r 50 0 0A P U s e r G u i de
For jobs coming through the network, refer to the documentation
that came with your color server for information on how to select
HCS options on the print driver screens.
How to Enable Automatic Output Switching
If your system configuration contains two High Capacity Stackers,
you have the option to enable Automatic Output Switching. With
Automatic Output Switching, the digital press automatically selects
a usable HCS Stacker Tray to deliver your collated sets.
When the HCS Stacker Tray becomes full or when the Unload
button is selected, the digital press delivers all paper in the digital
press to the same Stacker Tray and then switches to the other
Stacker Tray for the rest of the job.
NOTE: The HCS Stacker Tray has a capacity of 3500 sheets of 24
2
lb (90 g/m
) centerline paper (or 370mm high). Always refer to the
Recommended Materials List and the Speciality Media Guide for
up-to-date information on using specific media types with the
HCS.
A DFA (Digital Finishing Architecture) finishing device can be
connected directly to the digital press or to the HCS.
All DFA devices are installed by your Xerox service
representative. Once installed, the UI screens provide Finishing
Module selections.
For jobs coming through the network, refer to the documentation
that came with your color server for information on how to select
DFA options on the print driver screens.
A paper jam in the HCS will be indicated by a message on the
digital press UI. Follow the instructions displayed. The image on
the stacker Control Panel will flash showing the area where the
jam is located.
4. A c c es s o r i e s
4-13
Advertisement
Table of Contents
